Samsung 3.5" 1TB 7200RPM 32MB Sata hibátlan - Jelenlegi ára: 12 000 Ft

A lemez hibátlan, nincs rajta bad sector.
Nagyobbra cserélem, ezért adom el. Megtartottam volna + helynek, de amilyen árak vannak, most inkább megválok tőle...
Szegeden személyes átvétel, egyébként levélként postázom, a posta költség 800 Ft kb. amit a vevő fizet.
A smart adatai Linux smartctl szerint (hdsentineles képet külön kérésre mellékelek, de ennél többet az nem mond):
smartctl 5. 42 2011-10-20 r3458 [x86_64-linux-3. 1. 1-gentoo] (local build)
Copyright (C) 2002-11 by Bruce Allen, http: //smartmontools. sourceforge. net
=== START OF INFORMATION SECTION ===
Model Family:      SAMSUNG SpinPoint F1 DT
Device Model:      SAMSUNG HD103UJ
Serial Number:     xxxxxxxxxxxxxxx
LU WWN Device Id: 5 0000f0 00b036365
Firmware Version: 1AA01109
User Capacity:     1. 000. 204. 886. 016 bytes [1, 00 TB]
Sector Size:       512 bytes logical/physical
Device is:         In smartctl database [for details use: -P show]
ATA Version is:    8
ATA Standard is:   ATA-8-ACS revision 3b
Local Time is:     Sun Nov 27 12: 44: 07 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:   (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:       (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (11739) seconds.
Offline data collection
capabilities:                     (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:             (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:         (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:         (   2) minutes.
Extended self-test routine
recommended polling time:         ( 196) minutes.
Conveyance self-test routine
recommended polling time:         (  21) minutes.
SCT capabilities:               (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   099   099   051    Pre-fail  Always       -       266
  3 Spin_Up_Time            0x0007   077   077   011    Pre-fail  Always       -       7870
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       43
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       25623
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       2
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       43
 13 Read_Soft_Error_Rate    0x000e   099   099   000    Old_age   Always       -       266
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   099    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       266
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   066   000    Old_age   Always       -       33 (Min/Max 13/34)
194 Temperature_Celsius     0x0022   065   062   000    Old_age   Always       -       35 (Min/Max 13/38)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       156601283
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   100   099   000    Old_age   Always       -       0
SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh: mm: SS. sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49. 710 days.
Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 58 4b 70 e2  Error: UNC at LBA = 0x02704b58 = 40913752
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 80 53 4b 70 e2 08      00: 51: 02. 420  READ DMA
  c8 00 f0 d3 4b 70 e2 08      00: 51: 02. 410  READ DMA
  ef 90 03 00 00 00 a0 08      00: 51: 02. 410  SET FEATURES [Reserved for Serial ATA]
  ef 10 02 00 00 00 a0 08      00: 51: 02. 410  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08      00: 51: 02. 400  IDENTIFY DEVICE
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.   [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



Jelenlegi ára: 12 000 Ft

Az aukció vége: 2011-12-04 21:00
. Samsung 3.5" 1TB 7200RPM 32MB Sata hibátlan - Jelenlegi ára: 12 000 Ft